Prinsu Roof Rack Tacoma Double Cab 2005 – 2023 – Cab Rack Fits 2nd & 3rd Gen Toyota Tacoma
A cab rack that will entirely improve the functionality of your Tacoma. The Prinsu Roof Rack Tacoma is our best-selling rack at Off Road Tents. Why?
First of all it’s made in America, directly in Idaho. Second, installing it is quite simple as it doesn’t require any drilling and bolts to the existing Tacoma roof factory mounting points. Third, it’s a fully adjustable and modular rack, with crossbars (or slats) that can be removed or added depending on your likes and needs. Last but not least, it has a 1,000 lbs weight capacity.
This Prinsu Tacoma cab rack fits any Toyota Tacoma 2nd and 3rd Gen (2005 to 2023) in the double cab configuration.
The rack itself is made of 2 laser aluminum side rails with a 3/16” thick 5052 aluminum plate, more than enough for a solid off road performance. The thickness of the plate can handle the weight of heavy cargo even with the vibration caused by off road trails. Built tough. Each rail has 3 mounting tabs that allow you to easily bolt the rack into the 5 factory mounting holes on each side of the roof of your Tacoma, ensuring a quick and drill free installation.
When it comes to the slats or crossbars, each one is made of a 2” x 1” aluminum extrusion with a two t-slot channels at the top and bottom of the slat, and one more t-slot channel on the other two sides. This allows you to have a wide range of tie-down solutions for a safer transportation of any type of gear, cargo or accessories. The rack also includes a 1/8” 5052 aluminum plate wind deflector.
IN STOCK – FREE SHIPPING!
The whole roof rack comes powder coated in black, and all the hardware (bolts, screws, etc) comes in a black zinc finish to match the look of rack. A sleek and edgy off-road looking rack to upgrade not just the capabilities of your Taco, but the looks of it.
Prinsu Rack Tacoma Advantages:
- Made in America
- Limited Lifetime Warranty
- Easy installation in less than 40 minutes
- No drilling required
- Works with all sunroof and no sunroof Toyota Tacoma
- Fully modular roof rack
- 1000 lbs static load rating
- Best selling roof rack at Off Road Tents
Prinsu Roof Rack Weight Limit
This Prinsu Tacoma roof rack has a dynamic weight capacity of 600 lbs, that’s when the vehicle is in motion. It then has a static weight capacity of 1000 lbs, that is when your vehicle is parked.
Needless to say, such a high load rating allows you to carry any item that you can imagine over this cab rack. Whether that’s a roof top tent, a cargo box, RotoPax, Maxtrax, fishing equipment or other gear, the rack can handle it. 1000 lbs of load rating is one of the safest capacities in the market and it can really handle almost everything. As a rule of thumb, try to keep the weight of the cargo on the rack the same or below its load rating.
Since it is completely modular, you can choose how you want it configured depending on the need, adding more slats or even taking some off. It comes with standard 6 cross bars (slats) for cargo. Keep in mind that with less slats, the weight capacity of the rack decreases, whilst with more slats it increases.
As a side note, this rack works both with sunroof and no sunroof configurations. If you have a sunroof, you can tilt it open with all the slats installed. If you want to fully open it, you can easily remove a few slats and still use the other slats to carry equipment. You can then just put back all the slats when you need to carry more or heavier gear.
Prinsu Roof Rack Tacoma Wind Noise
This roof rack comes with a 1/8″ 5052 aluminum plate wind deflector to help reduce both the wind noise and resistance, thus increasing the aerodynamics of your rig. Add to that an already included noise reducing trim which attaches directly to the wind deflector to fill the gap between your Taco’s roof and the rack. This rubber trim is designed to avoid impact with the vehicle, as well as withstanding all weather conditions.
Finally, this is one of the lowest profile roof racks in the world, adding just 2″ to the top of your cab, therefore the wind resistance and noise is kept to a minimum.
Prinsu Roof Rack Tacoma Light Bar
If you want to add a light bar to your rack, it’s simple. Prinsu gives you the option of choosing the wind deflector with a built-in cutout for 40″ to 42″ wide lightbars. The deflector still acts quite well against wind resistance, and you can mount any brand of led light bar to it.
Cali Raised LED 42″ Lightbars are offered in case you’d like to pair your Prinsu rack with an amazing and solid light bar. Make sure to select yours when choosing the product’s variants. In case you’d like to read more about the light bars, here they are:
- Cali Raised LED 42″ Slim Single Row LED Lightbar. Click HERE
- Cali Raised LED 42″ Slim Single Row LED Lightbar (Amber). Click HERE
IMPORTANT: LP4 Light Pod Cut Out is offered as an option for the Prinsu Rack. We also carry the respective Baja Designs LP4 lights. Each Wind Deflector can accommodate a total of 7 LP4’s.
- In case you’d like to read more about the Baja Designs LP4 Pro LED Lights and add them to your order, Click HERE!
Prinsu Roof Rack Tacoma Dimensions:
Weight Of Rack Installed | 38.5 lbs |
Overall Length | 64″ |
Side Rail Length* | 2.125″ |
Height Added** | 2″ |
Clearance Between Roof & Rack | 0.75″ |
Width | 47″ |
Dynamic Weight Capacity | 600 lbs |
Static Weight Capacity | 1000 lbs |
Number Of Crossbars | 6 |
Warranty | Limited Lifetime |
*As measured at the center of the side rail
**As measured from the center point of the roof
Prinsu Tacoma Roof Rack Features:
- 2 laser cut side rails constructed of 3/16″ 5052 aluminum plate
- The rails have 3 mounting tabs each, allowing you to bolt the rack into the 5 factory mounting holes on each side of the roof
- No need to drill or modify your rig
- The crossbars are made from a 2″ x 1″ aluminum extrusion that has a two top facing T-slot channels
- Many different solutions for tie-down options, cargo security, or adding other rack accessories
- All product comes in black
- All assembly hardware comes in a black zinc finish so as to match the product
- 1/8″ 5052 aluminum plate wind deflector to help with aerodynamics and prevent wind noise
- Comes standard with 6 cross bars for cargo and 1 additional for mounting of a wind deflector, lightbar, or combination of the two
Tacoma Prinsu Rack Fits:
- Toyota Tacoma 2nd/3rd Gen: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 & 2023.
Prinsu Roof Rack Tacoma Install Instructions:
- View the Install Manual HERE!
Prinsu Roof Rack Tacoma Review:
Compatible Tacoma Prinsu Rack Accessories:
- Prinsu Summit Handles: CLICK HERE
- Prinsu Roof Rack Grab Handles: CLICK HERE
- Prinsu Awning Mounting Brackets: CLICK HERE
- Prinsu Load Panel: CLICK HERE
- Prinsu GoPro Mount: CLICK HERE
Prinsu Rack Tacoma FAQs
How much can a Tacoma Prinsu rack hold?
Static weight capacity is 1000 lbs and the dynamic weight capacity is 600 lbs. That means it can withstand 2-3 people and a roof top tent at the same time.
Will this rack fit a Tacoma double cab?
Yes. This Tacoma cab rack is a modular, adjustable, and completely bolt-together roof rack that is available for both double cab as well as access cab Toyota Tacoma trucks.
Can I fit a light bar on the rack?
As we mentioned above yes you can! You can fit a 42″ lightbar on your Prinsu roof rack. The most popular choice is the Cali Raised LED 42″ single-row lightbar which you can check out HERE.
Can I use an awning with the Tacoma Prinsu rack?
The answer to this is another YES! Any awning will do great, but preferably, given it’s a short roof rack and the Tacoma has a shorter cab, you should get a shorter awning.
Can my Tacoma Prinsu roof rack carry a roof top tent?
Absolutely. This roof rack can hold 1000 lbs when parked, meaning it can easily and safely carry any roof top tent over it.
How much weight does a Prinsu rack add?
This Prinsu tacoma roof rack adds 38.5 lbs to the cab of your Taco.