Front Runner Quick Release Roof Top Tent Mount Kit Front Runner

Front Runner Quick Release Roof Top Tent Mount Kit – Fits Most Tents

If you’re tired of struggling when mounting or dismounting your RTT, these brackets have solved your problem.

The Quick Release Tent Mount Kit by Front Runner is the solution for all those tent owners that want a hassle-free tent mounting and un-mounting to their rack. Forget about wrenching in tight spaces. 

An example of a very common case use is the following: if you have a limited garage clearance, or simply want to store the car top tent during the week, this product is a must have.

Installing the Front Runner quick release mounts is incredibly simple, with a simple wrench you will be able to compete the process in less than 15 minutes.

Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or mount your roof top tent. Simply release the tabs on the 4 latches and lift the tent away in seconds.

The brackets can be mounted either on top of the rack, which is the tallest option, or you can mount the brackets so the “wings” of the brackets are bolted from underneath the rack and the latch portion of the bracket comes up between the two slats.

The Quick Release Tent Mount Kit will work with your tent! It comes with a variety of mounting plates for different tent channels. From Tepui, to CVT, to FSR or Eezi-Awn, it’ll work.

Roof Top Tent Quick Release Features:

• After the brackets are installed to the rack, no tools are needed to attach or detach a roof top tent.
• This products is compatible ONLY with Front Runner roof racks.
• To release tent, simply release the safety catch on the latches.
• This strong and rattle free mounting system is built off-road tough for use with Front Runner Racks.
• Tents can be mounted at two different heights, depending on clearance needs. The bottom of the tent can sit either 40mm / 1.57 inches or 17mm / 1 inch above the rack slats.
• The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available.
• No tent modification required.
• Removed tents can be stored on the ground, raised slightly off the floor with the stainless steel bobbins.
• Supplied with all required mounting hardware.

Compatibility Of The FRO Quick Release: 

• This product is compatible ONLY with Front Runner roof racks.
• Compatible with most popular soft shell tent brands like Guana Equipment, TJM, ARB, Tepui, etc.
• NOT compatible with the Freespirit Recreation (FSR) Roof Top Tents. 
• Hard shell tents normally need additional support. Our recommendation is to purchase the kit of 6 brackets.
• if you have a hardshell tent from a brand such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use the Front Runner Hardshell Support Channels
• Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent.

Front Runner Quick Release Consists Of:

• Sets of 2, 4 or 6 Quick Release Brackets depending on the selected quantity
• Installation Hardware
• Fitting Instructions
• Materials used:
• Black powder coated 3CR12 stainless steel
• 304 Stainless steel
• Dimensions per assembled bracket: 
• 131mm (5.2″) L x 142mm (5.6″) W x 60mm (2.4″) H
• Weight: 6.6kg (14.6lbs) 

Quick Release Tent Mount Kit Install: 

Front Runner Mounting Bracket Video: