Icon Tacoma 0-2″ EXP Suspension System – Stage 1 Icon

Icon Toyota Tacoma 0-2″ EXP Suspension System – Stage 1 – 2005-Current

 

Any vehicle, much less an off-road vehicle, must have a reliable and sturdy suspension system. It can improve how well your car handles rocky terrain without harming it. We are therefore delighted to present the Icon suspension system made to fit the Tacoma models.

The Stage 1 EXP suspension system from ICON Vehicle Dynamics is the entry level performance suspension system for the Toyota Tacoma and is designed to improve on- and off-road performance as well as front-end lift and leveling for a suitable stance and the ability to accommodate up to 33″ tires. This system combines our dependable 2.0 Aluminum Series nitrogen-charged monotube shocks for the back with the cutting-edge new 2.5 EXP series coilover shocks.

The 2005–Current Toyota Tacoma EXP Series front shock absorbers are the heart of this Stage 1 system. They combine the performance of a quality 2.5–inch diameter shock absorber with the ease and financial advantages of using the Tacoma’s factory coil spring and other parts. EXP provides 0 to 2 inches of suspension elevation, custom-tuned performance, and the longest possible travel in a cost-effective package, bridging the gap between spacer lifts and threaded bodied coilovers.

The provided sway bar relocation brackets enable sway bar clearance from the EXP coilovers and reduce sway bar link bind throughout the suspension travel range. This makes it possible for the suspension to move more freely and to accommodate the complete range of wheel movement without placing undue stress on any OE parts.

Rear shocks from the V.S. 2.0 Aluminum Series that are specifically designed for the 2005–Current Tacoma complete the Stage 1 EXP suspension system. The 2.0 Aluminum Series shocks are a premium improvement for the weekend warrior and daily street motorist seeking better on and off-road performance. They give your Tacoma balanced front-to-rear vehicle control and a fantastic driving experience when combined with the ICON 2.5 EXP Series front coilovers.

Upper Control Arm 

Even though this kit does not come with a UCA or upper control arm we want to talk about it and explain its importance. Whenever you are changing your vehicle’s geometry and upgrading it with a suspension kit, especially on 4WD vehicles, you absolutely need an upper control arm.

The UCA is there to correct alignment and inherent clearance issues that arise when you lift or modify the suspension of your 4WD. Upper control arms can be found on independent front suspension (IFS) vehicles and they connect the top of the spindle to the frame.

The UCA is not a load-bearing piece of an IFS suspension, however, it does serve the purpose of guiding your spindle in a pre-determined motion when your suspension cycles up or down. Said load is handled by the lower control arm, which connects to the lower portion of the spindle.

Icon Tacoma Suspension System Feature

• Vehicle specific design for 2005-2022 Toyota Tacoma
• 2.5 EXP Series front shocks with internal reservoirs utilize factory coil and coil hardware
• Adjustable front ride heights from 0-2” of front lift over stock with the use of snap ring
• Included sway bar relocation brackets reduce ensure sway bar clearance from EXP coilovers
• Allows for full wheel travel without overstressing OE components
• 2.0 Aluminum Series rear shocks provide balanced tune with coilovers and increased performance
• All ICON shock absorbers are fully rebuildable and re-tunable

Tech Info

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: ICON Alloys | 17×8.5 with 4.75” Backspace / 0mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 18×9 with 5.00” Backspace / 0mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 20×9 with 5.00” Backspace / 0mm Offset
• Recommended Aftermarket Tires: 33″ x 11.50″ (Minor fender trimming may be required)
• APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. LIFT HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE.
• APPLICATION NOTE #110: TRIMMING REQUIRED FOR RECOMMENDED TIRE SIZE
• APPLICATION NOTE #144: NOT COMPATIBLE WITH TRD PRO
• TECH NOTE: Not compatible with 2005-2015 rear wheel drive Tacomas with 5 wheel lug studs
• TECH NOTE: Not compatible with 2021-2022 Tacoma Trail
• TECH NOTE: Included rear shocks are compatible with 0-1.5″ of rear lift over stock

Included

• 58632 (QTY: 2) | 05-UP TACOMA FRONT 2.5 EXP COILOVER
• 611030 (QTY: 1) | 05-UP TACO/07-09 FJ SWAYBAR RELOCATION KIT
• 56503 (QTY: 2) | 05-UP TACOMA 4WD 0-1.5″ REAR 2.0 VS NR

3rd Gen Tacoma Suspension Kit Installation Manual

View the coilover kit installation instructions HERE!

View the swaybar relocation kit installation instructions HERE!

View the rear 2.0 VS NR installation instructions HERE!

ICON Warranty

View the ICON Vehicle Dynamics Warranty HERE!